Your Cart is Empty

Focus SE/ XD Pair

While the Classic was the speaker that first put Legacy on the map, it was the FOCUS that shook up high end audio with world class performance in a full range speaker just over $10,000. For Legacy Audio’s 25th anniversary, Chief Designer, Bill Dudleston pulled out all the stops for the new Silver Edition version, FOCUS SE. The XD version is also available, selectable through the version drop down box. The XD version incorporates a powered woofer utilizing a built in power amplifier.
  • Free Shipping on Legacy Products:
    Coupon code not needed!

    Selling Restrictions:

    We can only sell Legacy Products to USA addresses. If you are outside the USA, please contact Legacy Audio for a dealer in your country.

    Permission is needed to purchase from Morrow Audio:
    Please contact us before your purchase. We are not allowed to sell to you if you have a dealer in your area.

    “I started by re-sculpting the cabinet, making it a bit narrower, yet deeper. I stiffened and angled the sidewalls, front baffle, and cabinet top to avoid parallel surfaces and potential standing waves. Facets were machined into the cabinet corners to progressively narrow the baffle with rising frequency. Even the grille of the FOCUS SE has been sculpted to prevent diffraction.

    While the driver tolerances on the FOCUS are a stringent +/- 1dB of the target function,, the FOCUS SE drivers are then performance matched to +/-0.25 dB. The measurement data is then recorded in our database and archived by serial number.

    I chose to use Solen metallized polypropylene capacitors imported from France as bypasses in the high frequency network and braided silver cable to the upper ribbon. 

    The FOCUS SE makes a statement of quality and performance that I feel is unmatched by any other company at twice the price.”

    Since some smaller rooms can load up in the 60 to 80 Hz region when driven by full range speakers, a sculpting network can be activated to tame such conditions. It is completely out of circuit until engaged, yet eliminates overhang or ‘droning’ when needed.

    Black chromed cone feet, turned from solid brass, properly anchor the speaker to the floor boundary. A knurled adjustable leveling washer is incorporated. An elastomeric isolation pad is installed between the cabinet and cone to prevent re-radiation of mechanically induced vibration reaching the listener.

    The 14 step Black Pearl finish is cured for three weeks prior to hours of hand polishing and buffing. The completed system is protected by a custom made velvet bag and encased by three inch thick polyethylene foam for transport.

    Marking a quarter of a century of continuous refinement."

    Recommended Cables: The Morrow Audio SP6 or higher speaker cables are excellent for this product.

    Our Buyers Guide can also help you choose the perfect cables for your system.

  • Available Finishes:

    Natural Cherry, Black Oak, Medium Oak, Walnut, Rosewood, Premium Black Pearl, Premium Curly Maple, Premium Natural Sapele Pommele, Exotic Birdseye Maple, Exotic Olive Ash Burl, Exotic Cabernet High Gloss Sapele Pommele (see example below)


  • The binding post accepts our Standard Spade, Banana and bare wire (nude) cable terminations.

  • Speakers require a break in period. Just like a new pair of shoes, the speaker spider and surround needs to loosen up from their like new stiffness. Bass will deepen, midrange and highs will smooth out. You can expect around 150 hours for complete break-in.

    The easiest way to break your speakers in is to simply play music with a wide dynamic range. Turn the speakers up a little louder than you normally would will help loosen up the material.
  • Product Manual Download (2 MB)
    Application: Full range tower with mastering grade clarity and high efficiency
    System Type: 6 driver, 4 way
    Tweeter: Dual Air Motion Tweeter System- 1" AMT Super Tweeter, silver HF wire
    Midrange: Dual Air Motion Tweeter System- 4" AMT Tweeter
    Midwoofer: Dual 7" Silver Graphite, cast frame
    Subwoofer: Dual 12" spun aluminum diaphragm, rubber surround, total enclosed neo motor, long throw suspension, with cast frame
    Low Frequency Alignment: Assisted 6th order Butterworth, dual rear ported
    Inputs: 2 Pair binding post for Treble and Bass
    Internal Amplification: None, Internal Amplification available in the Focus XD
    Recommended Amplification: 30 - 750 Watts
    Freq. Response (Hz, +/-2dB): 18-30K
    Impedance: 4 Ohm
    Sensitivity: 95.4 dB (2.83V@1m)
    Crossover: 120, 2.8K, 8K
    Dimensions HxWxD (inches): 55 x 14 x 15.375
    Shipping Dimensions HxWxD (inches): 62 x 22 x 22
    Weight (each): 125 Ibs
    Shipping Weight (each): 177 lbs
  • There are no returns for Legacy products. See Policy