MC10 / MC16 / MC20 Step Up
"The MC series moving coil step-up transformers are used to amplify the low level output signal from a moving coil cartridge bringing it to the appropriate level to drive a moving magnet phono preamp."
Regular Price: $2,800.00 Call for price!
Shipping Cost - Have a question?
Why Morrow Audio?
When you use Morrow Audio as your audio system consultant, you receive these benefits...
- Personal care and attention: We are personally here to help you find that "perfect" product that will bring years of pleasure and enjoyment.
- We can be reached: When you call or email us, you will reach a "real" person, not a secretary or answering service. You will reach someone who is knowledgeable and versed in the audiophile hobby. We also reply quickly, no more waiting around for hours to get a reply.
- Knowledge & service: Besides being an audiophile himself, Mike Morrow also has 30 years of professional electronics service experience. When you talk to Mike, you are talking to someone who can go beyond the common questions, understanding the product electronics inside and out! Although we do not do any repairs here, we will work between you and the manufacturer to be sure that any repair is complete and satisfactory!
- Honesty: We are not out to just "make the sale", we are here to find the perfect match for your system. We will never sell you a product that is not a good match or one that will not bring an improvement. Some of you have discovered this as you called about our cable products. We analyze your budget, your system and then find and recommend to you the best possible solution that will bring great improvements and enjoyment!
| Product Features: | |||||||
• MC10: provides 10 times transformation ratio or 20db of gain
• MC16: provides 16 times transformation ratio or 24db of gain • MC20: provides 20 times transformation ratio or 26db of gain The MC series moving coil step-up transformers are used to amplify the low level output signal from a moving coil cartridge bringing it to the appropriate level to drive a moving magnet phono preamp. If additional loading is needed, it can be done through the parallel input RCA connectors.
The MC series transformers are large size single C-core double coil transformers using a proprietary amorphous core material. Special winding techniques were developed in order to minimize inter-winding capacitances and maintain wide frequency response. They are optimized sonically to be as invisible as possible.
The transformers are shielded with mu-metal and are potted in 10mm thick soft iron nickel coated enclosures providing immunity to outside magnetic fields and a quiet and noise free performance.
The MC transformers were developed in conjunction with the Ypsilon VPS100 phono preamp. They can be used with most of the moving coil cartridges. For optimum performance the MC transformers can be used within a specific range of cartridge output levels.
MC10 may be used with cartridges from 0.4 - 0.6mv MC16 may be used with cartridges from 0.3 - 0.4mv
MC20 may be used with cartridges from 0.2 - 0.3mv
|
|||||||
| Product Specifications: | |||||||
MC10: Frequency Response -3db (source impedance <50 ohm): 8Hz - 70kHz Inductance (measured at secondary): 80H<
Max Level at 20Hz (measured at secondary): +20dbu Dimensions: 3.94 x 4.72" (HxD) Weight: 8.8 lbs. MC16:
Frequency Response -3db (source impedance <50 ohm): 8Hz - 65kHz Inductance (measured at secondary): 80H<
Max Level at 20Hz (measured at secondary): +20dbu Dimensions: 3.94 x 4.72" (HxD) Weight: 8.8 lbs. MC20: Frequency Response -3db (source impedance <50 ohm): 8Hz - 60kHz Inductance (measured at secondary): 80H<
Max Level at 20Hz (measured at secondary): +20dbu Dimensions: 3.94 x 4.72" (HxD) Weight: 8.8 lbs. |
|||||||
|
|||||||
| Official Website: | |||||||
| http://www.ypsilonelectronics.com |
PRODUCT QUESTION FORM
Fill out the form below and we will respond to you shortly.
You may also call us at 800-280-9167 or 859-356-6994.